Because the hub and steering knuckle on the HiAce and Caravan are extremely tightly seized together, we recommend the KTN-235 rather than the FF-190. (Even with the KTN-235, the inner bearing race remains on the hub, so please purchase the KTN-775 separator separately.)

It cannot be used on the Caravan because it uses tapered roller bearings. The IBP-935N can only be used with ball bearings.

Because this type inserts directly into the bearing, the collar cannot be removed at the same time. Split the collar separately with a chisel or similar tool before pulling out the bearing.

It can be used by purchasing the HB-712 plus optional attachments No.13, 14, and 15.

It cannot be used because the drive axle leaves insufficient clearance. The LW-3000 and BLW-1924 can be used.

For kei cars through standard passenger cars only; cannot be used on heavy-duty vehicles.

The numbers above are old patent numbers stamped on the products, not model numbers. Please refer to the compatibility chart below to select the product.

The M2024B is only for heavy-duty vehicles and cannot be used on 2t or 4t vehicles.

can be performed. C-90N・C-101・C-103 have older and newer versions, so please check the dimensions.

Parts can be purchased separately. Older center bolts for the KP-40 Series, KP-60 Series, KP-80 Series, SW-430, KP-140, and KP-150 use soroban-type threads, so please also purchase and replace the holder and center adapter. (Current models use trapezoidal threads.)