Product - Engines | KOTO SANGYO CO., LTD.|

Engines

ALTERNATOR ADJUST WRENCH

KTA-200

Can adjust the belt of the alternator on TOYOTA HIACE etc. without leaving driver’s seat.

This wrench is not a interfering to the around bolts, etc.

BELT LOOSEN SOCKET

BY-27 (PAT.P)

If only put it into a fan belt and twists it, the belt becomes loose after moving alternator.

Absolute effect for light vehicles.

belt loosen socket / image2

CAM LOCK CLAMP SET

KEL-50 (PAT.D)

Can easily fix cam pulley when exchanging the timing belts of twin cam engine.

All you have to do is install at intervals of cam pulleys by one-touch operation.

Can be also used for a small diesel engine.

Can cope with SUBARU vehicles, and HONDA vehicles having obstructions between pulleys.


KEL-2	KEL-4

CAM STOPPER WRENCH

KSR-20N

Special tool for cam shaft pulley, injection pump pulley.

cam stopper wrench / image2

PULLEY WRENCH (STRONG TYPE)

SR-60

Fixes the power steering of NISSAN, HONDA, MITSUBISHI and the cam shaft pulleys.

It has a total length of 610mm if using an extension handle.

pulley wrench (strong type) / image2

HOLE LEVER

PH-50

Can put on and take off the water pump speedily and easily.

Can be also replaced timing belt.

Available to use it for the pulley made by aluminum.

hole lever / image2

CRANKSHAFT PULLEY PULLER

KH-114N

Easy to extract the tight crankshaft pulley.

Can pull out crankshaft pulley without removal of radiator.

Become easy working if fixing H holder by a monkey wrench etc.

crankshaft pulley puller / image2

CRANKSHAFT PULLEY PULLER

KH-200

Easy to pull out the tight crankshaft pulley of any vehicle.

crank shaft pulley puller / image2

CRANKSHAFT PULLEY PULLER

KH-300

When removing the fixed bolt of crankshaft pulley, can work for pulling out the pulley in succession as this puller has the preventive function of pulley corotation.

crank shaft pulley puller / image2

CRANKSHAFT PULLEY WORK SET

KH-614N

Combines crank lever preventing the pulley from corotation with crank pulley puller.

PILE CRANK PULLEY STOPPER

PS-800

Exclusive tool for HONDA vehicles.

Can adjust 4 kinds in height on the hexagon part in compliance with the type of vehicles.

pile crank pulley stopper / image2

POWER PULLET STOPER

PPS-150N (PAT.P)

Can be used for loosening crank pulley fix bolts.

Very convenient for fixing a pulley with damper (TOYOTA vehicles mainly) as this tool is fixed to the inside of pulley.

power pullet stopper / image2

CRANKSHAFT TIMING GEAR PULLEY PULLER

KH-130

Special puller with ultra thin jaws for the removal of crankshaft timing gear at no space place.

crankshaft timing gear pulley puller / image2

CRANK SHAFT & DRIVE SHAFT OIL SEAL PULLER SET

OL-200N

Can be put on and taken off the oil seal of crankshaft and camshaft.

Available for taking off the oil seal by a hand if the space just big enough for you to put your hand enough.

Moreover, the seal lever is a simple design, superior and durable quality.

Most suitable for the installation work of crank & camshaft at the narrow place of light vehicles, F.W.D, FR vehicles.

c rank shaft & drive shaft oil seal puller set / image2

c rank shaft & drive shaft oil seal puller set / image2

crank shaft & drive shaft oil seal puller set / image3

COUPLING SHAFT STOPPER

CP-1012N

Can fix the water pump pulley (coupling shaft) of RF vehicles.

Very convenient for removing work at very narrow space between fan and pulley.

coupling shaft stopper / image2

ENGINE HEAD SOCKET WRENCH

4S-003LD

Can be used to squeeze the engine head bolt of double hexagon for high torque service.

* 1/2sq(12.7mm) size: 10mm, 12mm, 14mm

engine head socket wrench / image2

EXCHANGE WRENCH

EX-25

Exclusive tool to use at narrow engine room.

Easy to work at narrow engine room as this tool has a 9.5mm square and a 12.7mm square.

exchange wrench / image2

DYNAMO BEARING & TIE ROD PULLER

TP-20

Can be used to pull out the dynamo bearing of trucks and the ball joint of light vehicles.

MINIATURE DYNAMO BEARING PULLER

TOP-20M

Removes dynamo bearing, cutter bearing and cleaner bearing.

Can be used to break up a signal rotor for the distributor overhaul.

VALVE LIFTER

VL-800

All-purpose tool for the removal and installation of bulb spring after removing engine head.

Available for light vehicles ～　4 ton trucks.

valve lifter / image2

VALVE SPRING LIFTER FOR DOHC MODELS

VS-380 (PAT)

Specially designed for DOHC engines.

With engines as mounted, repair works are practicable even for mini cars.

valve lifter / image2

VALVE SPRING LIFTER FOR OHC MODELS

VS-150DN

If just taking valve spring (cotter) away, can replace steam seals without removal of engine head.

Used for Diesel engines and OHC engines for passenger vehicles and small trucks.

POWER STEERING HOSE WRENCH

KHP-40

Convenient for the removal work and the bolting work of the oil leakage at joint part of high pressure hose (TOYOTA vehicles).

Convenient to used for removal and installation of high-pressure hose (power steering pump and air conditioner)

Can work without taking away around obstacles (oil pump, etc.).

Easy to work at the narrow place of engine if using an extension bar.

power steering hose wrench / image2

Page top