KOTO SANGYO Co., Ltd.
PRODUCT
(VEHICLE LOCK NUT SETTING TYPE)
Axles
|
|
|||||||
 |
FRONT HUB & BEARING PUSH PULLERFF-190 (PAT) |
||||||
|
|
|||||||
| Can cope with three kinds of work. Assembly of front hub and knuckle. Assembly and disassembly of front hub ball bearing.   |
|||||||
 |
FRONT HUB & BEARING PUSH INSERTER
KPF-240 |
||||||
|
|
|||||||
| Exchange for the front knuckle bearing of F.W.D. vehicles. Convenient for the assembly of hub and knuckle by using hydraulic press.   |
|||||||
 |
FRONT HUB & REAR SHAFT PULLERKP-105N |
||||||
|
|
|||||||
| Disassembles the hard to remove front hub of F.W.D. vehicles and removes
rear shaft of F.R. vehicles. Most suitable to remove the rear shaft of F.R. vehicles. Can be used 4 holes, 5 holes, 6 holes tires (from F.W.D. vehicles to F.R. vehicles). Can be also used as wheel puller for light vehicles. Available to 2 kinds of work ( slide hummer and screw in ).  |
|||||||
 |
FRONT HUB & REAR SHAFT PULLER
KP-106 |
||||||
|
|
|||||||
| Easy to pull out the wheel hub of 4 holes and 5 holes tire by using the slide hummer. Can remove the tight hub if you use the center (attachment of this model) as this tool has a shock absorber function.  |
|||||||
 |
WHEEL HUB PULLERKP-5 / KP-10N |
||||||
|
|
|||||||
| Special puller for the pulling out of wheel hub. KP-5 is for light vehicles. KP-10 is for passenger vehicles. Easy to pull out the right drum if you punch the bolt head as this tool has a shock absorber function. ●contents
 |
|||||||
 |
TRUCK WHEEL HUB PULLERQW-330N / QW-300N |
||||||
|
|
|||||||
| Removes the front and real wheel of 4 ton ~ 10ton trucks and buses. Can be also used for the aluminum wheels having more than 50mm hole size.   |
|||||||
 |
TRUCK WHEEL HUB PULLERHB-710 / HB-712 |
||||||
|
|
|||||||
| Special tool for pulling out quickly the front and real inner bearing of
2ton～4ton trucks. Can adjust 10mm wide enabling to cope with many types of vehicles.  |
|||||||
 |
SPARE TIRE WRENCH SET4S-TS37 |
||||||
|
|
|||||||
| Can cope with 2 ton ～10 ton trucks. You are released from irksome works like tire rotation, etc. as this tool can use impact wrench.  |
|||||||
 |
BOLT CHANGER SETWB-214SH |
||||||
|
|
|||||||
| Applicable to 4-ton trucks ~ large-sized trucks (M20. M24 bolt correspondence). Can exchange the wheel bolts using a slide hammer easily and speedily Can be pull out and put in wheel hub bolts. |
|||||||
 |
INNER CONVERSION SETIC-400 |
||||||
|
|
|||||||
| All you have to do is to put in your own combination socket, it makes a quick change to inner bolt method. Can tighten inner nut only pulling it in the socket without talking off outer nut during inspection. Can work by this tool only without exchanging the socket for inner every time. |
|||||||
 more image |
TORQUE CONTROL WRENCHTCW-600 (PAT.P) |
||||||
|
|
|||||||
| Possible to tighten torque by your impact wrench on hand. Stops the revolution automatically if arriving at your requested torque value. The board type torsion bar we adopted enables light weight and compact size. The stable installation increases work efficiency.   more imformation |
|||||||
 |
ROUND HOUSING NUT WRENCHHW-235 |
||||||
|
|
|||||||
| Special wrench for removal and installation of round housing nut speedy. The pins of jaw (6, 8, 10mm dia.) can be exchanged by one-touch operation. Can be used for light vehicles (F.W.D.) ～ 4 ton trucks.   |
|||||||
 |
UNIVERSAL HOUSING NUT WRENCHHW-640 |
||||||
|
|
|||||||
| Can be put on and taken off 3 types (hexagonal, octagonal, round) of housing nuts. Easy to use design and very light weight. Can be opened and shut the jaw if you only turn the adjustable bolt. Can be used for 2 ton ～ large trucks.  |
|||||||
 |
QUICK STEERING WHEEL PULLERSW-430 |
||||||
|
|
|||||||
| Special tool for pulling out steering while. Easy to pull out the tight steering. Can be used for light vehicles ～medium-sized trucks. Please note that almost all vehicles are adopted shock absorbed steering shaft. So, the steering can not be made an impact by a hummer.  |
|||||||
Page top |
|||||||